Presser Feet & Accessories

This category helps you answer two questions before you buy or sew: what job does an accessory do, and is the exact variant suitable for your machine? A familiar name, photograph, shank label, or “universal” claim is not enough to establish fit. Presser feet can differ by attachment, machine family, stitch width, holder, part number, and regional listing.

Start with your machine and task#

• Check presser-foot fit by model and region before ordering or attaching an unfamiliar foot.
• Choose a walking or even-feed foot when layers or shifting surfaces need more even feeding.
• Choose a zipper, concealed-zipper, or piping foot by the guide shape and the job you need to do.
• Compare overedge and rolled-hem feet for different edge finishes.
• Set up a quilting, darning, or free-motion foot with the feed-dog and stitch instructions for your model.

Model and accessory references#

• Selected Janome 2212 presser-foot listings show selected Janome America accessory listings for that front-loading model.
• Janome Lap-Seam Foot parts and model lists show the separate 9mm and 5/7mm parts and manufacturer-listed model groups; verify the exact local model and current regional fit.
• Brother SA188 Open Toe Walking Foot model list lists the models Brother names for this 7mm-class foot and explains what the listing does not say about installation and clearance.
• Gathering feet for ruffles explains how a gathering foot differs from a ruffler and what to check before use.
• Binder feet for bias binding explains the guided binding path and variant checks.
• Roller and smooth feet for sticky materials compares two different ways manufacturers address difficult feeding.
• Brother SA206 dual-feed quilting guide explains its SA196 prerequisite and the listed-model distinction.
• Janome buttonhole feet compares sliding and buttonhole-foot variants, with a bounded 2212 lookup.
• JUKI presser foot with guide 40080952 lists the models shown for parallel-stitch guide marks.
• SINGER UK cording foot 250006313 records the listed machine groups and the dated storefront availability status.
• Janome HP Foot and Plate parts and model listings distinguish the two part-number lists from the standard-accessory statement.
• Janome Button Sewing Foot parts and model lists compare the 9 mm, 5–7 mm, and FL variants.
• Janome quilting kits compare kit contents and displayed model groups without assuming package inclusion.
• Janome Taping Guide Foot model listings keep three part groups separate, including one without a stated width class.
• Janome Border Guide Foot model listings explain the guide marks and list the displayed variants.
• Janome Ruler Foot Set 767434005 listings document two Janome pages with different contents, prerequisites, and model lists.
• Brother SA218 Ruler Foot listing explains the feature and setting condition Brother names without inventing a compatible-model list.
• Brother SA184 Edge Joining Foot model list records Brother USA’s displayed machine list and stated uses.

Manufacturer compatibility lists are tied to named models, regions, and accessory variants. Check the current machine manual and regional listing before purchase or use, then turn the handwheel by hand to confirm clearance wherever the manual calls for it. Stop if the needle touches the foot or plate.